presents
Canada
thyssenkrupp Materials North America
Change Password
- Homepage
- Find Product
- Product List
- Product Details
Add items to your cart in order to see pricing.
6101 T6 Aluminum Schedule 40 Pipe 4 Nominal, OD 4.5000 X 0.23700 "
Add items to your cart in order to see pricing.
6101 T6 Aluminum Schedule 40 Pipe 4 Nominal, OD 4.5000 X 0.23700 "
Part Number:
ALTUB69663
Material:
Aluminum
Alloy:
6101
Shape:
Pipe
Temper:
T6
Weight:
3.73 lb/ft
Nominal dimension:
4
OD:
4.5"
Thickness:
0.237"
Mill Source:
View All Mills
For more information about available mills for this product, click to chat with a customer service representative.
This feature is only available for our registered customers. Please register to enjoy all of the great features that PLUS has to offer.
If you have any questions, click to chat with a customer service representative.
Product Properties
Chemical
This table contains the chemical composition limits of wrought aluminum alloys in percent by weight maximum unless shown as a range or minimum. Except for “aluminum” and “others, ” analysis normally is made for elements for which specific limits are shown. For purposes of determining conformance to these limits, an observed value or a calculated value obtained from analysis is rounded off to the nearest unit in the last right-hand place of figures used in expressing the specified limit, in accordance with ASTM Recommended Practice E29.
Note: Use the arrows above to scroll left or right to show additional fields
(1) Includes listed elements for which no specific limit is shown.
(2) A .0008 weight percent maximum beryllium is applicable to any alloy to be used as welding electrode or welding rod.
(3) The sum of those “others” metallic elements 0.010 percent or more each, expressed to the second decimal before determining the sum.
(4) The aluminum content for unalloyed aluminum not made by a refining process is the difference between 100.00 percent and the sum of all other metallic elements present in amounts of 0.010 percent or more each, expressed to the second decimal before determining the sum.
(5) Beryllium 0.0008 maximum for welding electrode and welding rod only.
(6) Also contains 0.20 to 0.6 percent each of lead and bismuth.
(9) Boron 0.06 percent maximum.
(10) Also contains 0.40 to 0.7 percent each of lead and bismuth.
(12) Also contains 0.08 to 0.15 percent of zirconium.
Mechanical
The following typical properties are not guaranteed since in most cases they are averages for various sizes, product forms, and methods of manufacture and may not be exactly representative of any particular product or size. These data are intended only as a basis for comparing alloys and tempers and should not be specified as engineering requirements or used for design purposes. The indicated typical mechanical properties for all except 0 temper material are higher than the specified minimum properties. For 0 temper products, typical ultimate and yield values are slightly lower than specified (maximum) values.
Note: Use the arrows above to scroll left or right to show additional fields
(1) Based on 500,000,000 cycles of completely reversed stress using the R.R. Moore type of machine and specimen.
(2) Average of tension and compression moduli. Compression modulus is about 2% greater than tension modulus.
Physical
The following typical properties are not guaranteed since in most cases they are averages for various sizes, product forms, and methods of manufacture and may not be exactly representative of any particular product or size. These data are intended only as a basis for comparing alloys and tempers and should not be specified as engineering requirements or used for design purposes.
Note: Use the arrows above to scroll left or right to show additional fields
Fabrication
Note: Use the arrows above to scroll left or right to show additional fields
- Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D, and E ratings generally should be protected at least on faying surfaces
- Stress corrosion cracking ratings are based on service experience and on laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test and are expressed as follows:
- A = No known instance of failure in service or in laboratory tests.
- B = No known instance of failure in service; limited failures in laboratory tests of short transverse specimens.
- C = Service failures with sustained tension stress acting in short transverse direction relative to grain structure; limited failures in laboratory tests of long transverse specimens.
- D = limited service failures with sustained longitudinal or long transverse stress.
- This rating may be different for material held at elevated temperature for long periods
- Ratings A through D for Workability (cold), and A through E for Machinability, are relative ratings in decreasing order of merit.
- Ratings A through D for Weldability and Brazeability are relative ratings defined as follows:
- A = Generally weldable by all commercial procedures and methods.
- B = Weldable with special techniques or for specific applications which justify preliminary trials or testing to develop welding procedure and weld performance.
- C = Limited Weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
- D = No commonly used welding methods have been developed.
Value Added Services
The following are the value added services for this product.
Bending:
The process of bending material of various sizes and lengths to meet customers specifications.
Rolling:
The process of rolling metal to reduce and unify the thickness of material into a variety of shapes to meet customer specifications, including rings or ring segments.
Anodizing:
An electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts.
Deburring:
The process of removing burrs and sharp corners from cut piece pieces, often done by hand or a vibratory tumbler, depending on the size of the product and the number of pieces.
Drilling:
The process of drilling holes into material of various sizes and lengths to meet customers specifications.
Honing:
The process of precision machining the internal diameter (ID) of tube or pipe to provide tight tolerances and a high quality surface.
Machining:
The process of using machines to form material of various sizes and lengths to customer specifications.
Polishing:
The process of smoothing or refining the surface of a material.
Testing:
Additional material tests can be conducted to help customers meet their requirements.
Tumbling:
The process of deburring/polishing small parts in bulk using abrasives and rotation/vibrating motion in a barrel.
Welding:
The process of joining materials by using high heat to melt the parts together and allowing them to cool, causing fusion.
If you would like to request for any of the value added services, please utilize this special request form to initiate the discussion with our sales team.
Success
Your request has been sent. A representative from thyssenkrupp Materials NA will reach out to you soon.
A confirmation email has also been sent to: {0}
Request a Quote for Value Added Services
Aluminum Metal Values
Below you'll find today's price for Aluminum and see how it compares to the last month, last year, and last two years. To see more graphs like this for other materials, you can visit our Daily Metal Values page.
Add Product to Cart
1
Size
Don’t see what you’re looking for? Request it now
Success
Your request has been sent. A representative from thyssenkrupp Materials NA will reach out to you soon.
A confirmation email has also been sent to: {0}
Request a Custom Quote
Fill out the form below and a representative from Materials North America will reach out to you soon.
Product Properties
Chemical
This table contains the chemical composition limits of wrought aluminum alloys in percent by weight maximum unless shown as a range or minimum. Except for “aluminum” and “others, ” analysis normally is made for elements for which specific limits are shown. For purposes of determining conformance to these limits, an observed value or a calculated value obtained from analysis is rounded off to the nearest unit in the last right-hand place of figures used in expressing the specified limit, in accordance with ASTM Recommended Practice E29.
Note: Use the arrows above to scroll left or right to show additional fields
(1) Includes listed elements for which no specific limit is shown.
(2) A .0008 weight percent maximum beryllium is applicable to any alloy to be used as welding electrode or welding rod.
(3) The sum of those “others” metallic elements 0.010 percent or more each, expressed to the second decimal before determining the sum.
(4) The aluminum content for unalloyed aluminum not made by a refining process is the difference between 100.00 percent and the sum of all other metallic elements present in amounts of 0.010 percent or more each, expressed to the second decimal before determining the sum.
(5) Beryllium 0.0008 maximum for welding electrode and welding rod only.
(6) Also contains 0.20 to 0.6 percent each of lead and bismuth.
(9) Boron 0.06 percent maximum.
(10) Also contains 0.40 to 0.7 percent each of lead and bismuth.
(12) Also contains 0.08 to 0.15 percent of zirconium.
Mechanical
The following typical properties are not guaranteed since in most cases they are averages for various sizes, product forms, and methods of manufacture and may not be exactly representative of any particular product or size. These data are intended only as a basis for comparing alloys and tempers and should not be specified as engineering requirements or used for design purposes. The indicated typical mechanical properties for all except 0 temper material are higher than the specified minimum properties. For 0 temper products, typical ultimate and yield values are slightly lower than specified (maximum) values.
Note: Use the arrows above to scroll left or right to show additional fields
(1) Based on 500,000,000 cycles of completely reversed stress using the R.R. Moore type of machine and specimen.
(2) Average of tension and compression moduli. Compression modulus is about 2% greater than tension modulus.
Physical
The following typical properties are not guaranteed since in most cases they are averages for various sizes, product forms, and methods of manufacture and may not be exactly representative of any particular product or size. These data are intended only as a basis for comparing alloys and tempers and should not be specified as engineering requirements or used for design purposes.
Note: Use the arrows above to scroll left or right to show additional fields
Fabrication
Note: Use the arrows above to scroll left or right to show additional fields
- Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D, and E ratings generally should be protected at least on faying surfaces
- Stress corrosion cracking ratings are based on service experience and on laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test and are expressed as follows:
- A = No known instance of failure in service or in laboratory tests.
- B = No known instance of failure in service; limited failures in laboratory tests of short transverse specimens.
- C = Service failures with sustained tension stress acting in short transverse direction relative to grain structure; limited failures in laboratory tests of long transverse specimens.
- D = limited service failures with sustained longitudinal or long transverse stress.
- This rating may be different for material held at elevated temperature for long periods
- Ratings A through D for Workability (cold), and A through E for Machinability, are relative ratings in decreasing order of merit.
- Ratings A through D for Weldability and Brazeability are relative ratings defined as follows:
- A = Generally weldable by all commercial procedures and methods.
- B = Weldable with special techniques or for specific applications which justify preliminary trials or testing to develop welding procedure and weld performance.
- C = Limited Weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
- D = No commonly used welding methods have been developed.
Value Added Services
The following are the value added services for this product.
Bending:
The process of bending material of various sizes and lengths to meet customers specifications.
Rolling:
The process of rolling metal to reduce and unify the thickness of material into a variety of shapes to meet customer specifications, including rings or ring segments.
Anodizing:
An electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts.
Deburring:
The process of removing burrs and sharp corners from cut piece pieces, often done by hand or a vibratory tumbler, depending on the size of the product and the number of pieces.
Drilling:
The process of drilling holes into material of various sizes and lengths to meet customers specifications.
Honing:
The process of precision machining the internal diameter (ID) of tube or pipe to provide tight tolerances and a high quality surface.
Machining:
The process of using machines to form material of various sizes and lengths to customer specifications.
Polishing:
The process of smoothing or refining the surface of a material.
Testing:
Additional material tests can be conducted to help customers meet their requirements.
Tumbling:
The process of deburring/polishing small parts in bulk using abrasives and rotation/vibrating motion in a barrel.
Welding:
The process of joining materials by using high heat to melt the parts together and allowing them to cool, causing fusion.
If you would like to request for any of the value added services, please utilize this special request form to initiate the discussion with our sales team.
Success
Your request has been sent. A representative from thyssenkrupp Materials NA will reach out to you soon.
A confirmation email has also been sent to: {0}
Request a Quote for Value Added Services
Aluminum Metal Values
Below you'll find today's price for Aluminum and see how it compares to the last month, last year, and last two years. To see more graphs like this for other materials, you can visit our Daily Metal Values page.
Start with an empty cart
You have items in your cart from a previous session. Would you like to empty your cart before adding this item?